Fun To Do Dentifix Modeling LR Yellow Sand 1000ml 3D Printing Resin
- UV-curing resin for SLA (Formlabs) 3D printers
- Cures at known wavelengths of 350-405 nm
- Yellow color RAL 1002
- Package contains 1000ml bottle of resin
The idea was to create a powerful, affordable resin for dental modeling. The color needed to be optimum for the presentation of clear detail. Interaction with the Resin by technicians had to provide the least strain on the eyes caused by light reflection, while still allowing for efficient work in the laboratory.
This resin will replace Resin Form 2 Dental and is now available at substantial savings. This Resin can be used without modification to your machine.
Dentifix resin was created as a result of collaboration with The Resin manufacturer, Fun To Do, and practicing Dental Prosthetists. Created from this extensive Research and Development is the new Dentifix Resin, the most affordable Dental Resin available.
This resin is perfect for printing dental applications (models, alignment, contention, crowns, bridges, etc.). It can be used for all applications requiring high precision and detail.
Dentifix 3D modeling resin allows precision printing within 35 microns.
With a smooth surface and an almost matte, opaque color, Dentifix 3D modeling resin rivals traditional gypsum.
The Yellow Sand color was determined by Dental Prosthetists to be most effective for modeling along with less eye fatigue.
The surface of the model using Dentifix Resin is very smooth, and its hardness allows for precise angles, optimizing print quality, and reducing print failures.
You can create your own dental alignment models with this resin.
This resin is compatible with Formlabs Form 1, 1+, Form 2 and other SLA printers with VAT type resin tank.
Dentifix 3D Modeling Resin Properties:
Whereas the properties of Dentifix 3D Resin listed below are accurate, and every attempt has been made to ensure such, we give no warranty, express or implied, as to the accuracy of the properties as they relate to individual experience during the use of this product.
- Application: Dental Modeling, General Prototyping
- Color: Yellow Sand RAL1002
- Viscosity at 25C: 95 mPas
- Hardness: 81 Shore D
- Exposure energy: 18 mJ / cm 2
- Resolution: 0.02 - 0.085mm
- Tensile strength: 45 Mpa
- Elongation at break: 5%
- Shrinkage: <0.2%
We Also Recommend
Fun To Do Snow White NXTGEN 1000ml 3D Printing Resin
Fun To Do Castable Blend 1000ml 3D Printing Resin
Fun To Do Industrial Blend Red 1000ml 3D Printing Resin
Fun To Do Ash Grey NXTGEN 1000ml 3D Printing Resin
FilamentOne.com on Instagram