Dentifix-3D Modeling HR Grey 1000ml 3D Printing Resin

$ 106.00

Dentifix-3D Modeling Photopolymer is developed in collaboration with the dental industry leaders. This dental resin is designed for printing high-precision surgical templates, demonstration models of temporary crowns and bridges, master models and any other purposes.

The Dentifix resin has high hardness and tensile strength, and is temperature and chemical resistant and suitable for thermoforming of liners. To simulate gums, use the flexible resin Dentifix-3D Gingiva Mask.

  • UV-curing resin for DLP/LED 3D printers
  • Cures at known wavelengths of 350-405 nm
  • Ultra High Resolution Clear Modeling Resin
  • Package contains 1000ml bottle of resin

The Concept

The idea was to create a  powerful, affordable resin for dental modeling. The color needed to be optimum for the presentation of clear detail.  Interaction with the Resin by technicians had to provide the least strain on the eyes caused by light reflection, while still allowing for efficient work in the laboratory.

Dentifix resin was created as a result of collaboration with The Resin manufacturer, Fun To Do, and practicing Dental Prosthetists. Created from this extensive Research and Development is the new Dentifix Resin, the most affordable Dental Resin available.

This resin is perfect for printing dental applications (models, alignment, contention, crowns, bridges, etc.). It can be used for all applications requiring high precision and detail. 

Dentifix 3D modeling resin allows precision printing within 35 microns.

With a smooth surface and an almost matte, opaque color, Dentifix 3D modeling resin rivals traditional gypsum.

The Yellow Sand color was determined by Dental Prosthetists to be most effective for modeling along with less eye fatigue.

The surface of the model using Dentifix Resin is very smooth, and its hardness allows for precise angles, optimizing print quality, and reducing print failures.

You can create your own dental alignment models with this resin.

This resin is compatible with DLP 3D printers like SLASH, WANHAO DUPLICATOR 7, B9 CREATOR, PROJECT 1200, Phrozen Shuffle, Prusa SL1 and others.

Dentifix 3D Modeling Resin Properties

Whereas the properties of Dentifix 3D Resin listed below are accurate, and every attempt has been made to ensure such, we give no warranty, express or implied, as to the accuracy of the properties as they relate to individual experience during the use of this product.

  • Application: Dental Modeling, General Prototyping
  • Viscosity at 25C: 95 mPas
  • Hardness: 81 Shore D
  • Exposure energy: 18 mJ / cm 2
  • Resolution: 0.02 - 0.085mm
  • Tensile strength: 45 Mpa
  • Elongation at break: 5%
  • Shrinkage: <0.2%

     

Why buy from FilamentOne

  • USA company manufacturing and distributing 3D printing supplies and tools
  • Years of experience in the plastic industry and 3D printing technologies
  • Known for premium quality 3D printing filaments, great customer service and as a valued member of the community

You recently viewed

Clear recently viewed