Phrozen Wax-Like Castable 3D Printing Resin 500ml

by Phrozen
$ 79.00

 Wax-Like, easy to lost-wax cast 3D printing resin for Jewelry or Dental casting. 

Spec & Properties

  • Weight: 500g per bottle
  • XY Resolution: 0.047 mm
  • Layer Height / Parameter: 12 sec @ 50 um, Delay 2
  • Viscosity: 680 mPa.S (25C)
  • Density: 1.21 g / cm3
  • Suitable for: LCD 3D Printer
  • Hardness: Shore 65D

Operation

  • Suggest to use our resin and printer indoor under ventilated situation.
  • Avoid exposure to sunlight and indoor luminescence.
  • Please preserve our resin in closed opaque bottle in avoid of exposure to air.
  • Do not mix used and non-used resin together.
  • Please keep the resin away from kids.
  • Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Rules

  • Do not eat and swallow the resin. Go to hospital if necessary.
  • Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
  • Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
  • Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
  • Suggested safety equipment: gloves, mask, goggles, and lab coat.
  • Keep resin in room temperature and dry condition.

You recently viewed

Clear recently viewed