Phrozen Shuffle / Shuffle XL WiFi Setup Instructions

Phrozen Shuffle / Shuffle XL WiFi Setup Instructions

Recommended WiFi USB adapter: TP-Link N150 USB wireless WiFi (TL-WN725N)
  1. Connect LAN (Ethernet) cable from your router directly to the printer
  2. Connect the WiFi USB adapter to any available USB port at the back of the printer
  3. Turn on the printer
  4. Open IP address you see on the screen in your web browser
  5. Click on the WIFI icon you see at the top right corner
  6. Select your SSID and enter the Password
  7. Click on connect, disconnect the ethernet cable and reboot the printer

Next article Phrozen Shuffle: How to use NanoDLP with ChiTu slicer

Leave a comment

Comments must be approved before appearing

* Required fields